Powerblow by Kiiroo

RealcumberScripts
Good points - I'll give it another shot sometime. I didn't have any experience with this kind of toys so the sound was a bit surprising. I wish the intensity could be adjusted in DeoVR or the SLR haptics app.

The lube was the Fleshlube Water. And maybe it was the problem. Later I noticed that other sleeves felt weird too. Then after some research, I found out that Fleshlube isn't always the same. While my first bottle was just perfect, the second one was total crap. The bottle design was different and said "made in EU" instead of "made in Spain". It was itchy too. So I got rid of it and ordered couple of possible replacements - Gun Oil H2O being one of them.

czperv123 If you're using the Haptics Connect app, then you can change the intensity by tapping on the PowerBlow while it's connected.

raser1 The best thing is to do everything from deovr

Curieux Yes that's true, we will be integrating more and more features from Haptics Connect into DeoVR with future updates.

raser1 Tried the PowerBlow with Keon yesterday on one of the excellent scripts from @RealcumberScripts .
I would highly suggest that the scripts only activate the PowerBlow during Blowjob scenes and then switch of during handjob scenes, to create the relevant variety. Same for intercourse, let it rather only go on some times as in maybe full balls deep penetration.
Yes.. you can try and switch it of and on manually during the course, but it immediately breaks the whole immersion.
In my mind, the PowerBlow is an enhancement for the Keon, but not the primary function, and as such would work better if this is the approach of the script.
Thanks for all the hard work and effort to get these experiences better and better!

The keon and powerblow with the speed management directly on deovr is clearly the ultimate experience, the script management is up to the creator to adapt but for that a lot of people need to ask for this function

PornSurf05 Excellent feedback @PornSurf05 - We are aware and have plans to make the PowerBlow integration even better. Variety is definitely important and not needing to manually adjust it is for sure the ultimate goal.
We'll let you know when we can figure that out best, thanks again for your feedback!

PornSurf05 It's clearly a dream, maybe possible. The powerblow adds something amazing if used well.

PornSurf05 This post gets a +1 from me. I got the Powerblow and tried it with my Keon, it could be amazing. But the implementation of it just doesn't work at the moment.

The way it works now is more annoying rather than enjoyable, it sucks and releases too quickly the way the scripts work at the moment. You need the vacuum to hold during strokes. After a couple of minutes I had to switch the Powerblow off. However, I can really see the potential if the two devices were scriped independently. Different sensations during blowjob scenes to hand job / intercourse.

So I just got the Meta Quest 3 and tried it out with SLR and the DeoVR app. The power blow sucked so hard it almost ripped my dick off. lol. I know it is still a work in progress, but is there anyway to limit the max suction for the power blow in the DeoVR app?

RealcumberScripts Is the vacuum strength option only available using the phone app, or can I adjust it through DEOVR/SLR while in VR? The only options I can find are switching scripts or delaying the haptics. The suction is ridiculously strong. It literally sucks the lips of the sleeve into the holder. I wanted to get the Keon to use with it, but it's pointless if the sleeve can't slide up and down due to the suction strength being too damn strong. I mean, as soon as the actress touches the actor's member, it starts sucking, then continues to get stronger, even after she stops touching it If it's only available through the app, I can install direct to the headset using Aptoide, but then SLR won't connect if already connected to the app.

ogopogo currently the vacuum strength adjustments are only available using the mobile haptics connect app (we are discussing potential plans to include toy settings through direct BT connection in DeoVR)

Also playback improvements are incoming that should reduce/eliminate suction when there is no contact on the cock

For the time being I would recommend:

• using haptics connect app to adjust suction intensity
• slightly loosening the end cap of the kiiroo sleeve case while in use
• removing the rubber O-ring that creates the additional seal at the end cap of the kiiroo sleeve case
• removing the wide plastic cup that sits inside the wide opening side of Kiiroo sleeve case (that comes included with the powerblow sleeves)

these adjustments should all help significantly reduce suction as desired

RealcumberScripts Thanks, I'll try sieloading the Connect App. Although I hadn't actually tried the Connect app yet, I did have issues with the Lovense app when using the Gush. If paired with the app, even while installed to the headset, it would not pair with DEOVR/SLR until I disconnected from the Lovense app. But I will tray with the Connect app. I did find that I could at least use the down button to release the suction manually though. :-p

Hey guys, I've been working on the PowerBlow implementation for Haptics Connect and I'm happy to report some great improvements that will be coming soon.

• Improved playback quality, stutter has been minimized.
• Extra options to filter out faster strokes. This way it doesn't apply to the entire script like it used to.

In the future we may be able to add extra playback modes and turn it on/off based on the tags, so that it will only play during blowjob sections for example.

For the people who write and program these scripts and the technology behind it, here's an idea:

It would be great to be able to setup 3 steps of suction strengths for a user. Say you want "1" (lightest) to be at 20, "2" at 50 and "3" (most intense) at 85 e.g. Would be great if the Powerblow-script just cycles between these, mostly 1&2, just like how the real thing goes.

With "0" of course being where there is no blowjob playing in the vid.

Might be something for a far future. I don't know how difficult it is to do this. But I haven't seen anyone mentioning something like this so far. Think it would be awesome!

08session - Thanks for the suggestion - we have considered suction specific commands as you have suggested, though the issue is that would require 2 separate BT toy scripts running simultaneously (in addition to the still required regular up/down stroker script) which would mean a much higher backend development requirement for a relatively rare use case scenario

We have much better improvements incoming as @raser1 hilighted that we hope should soon give you guys an improved experience

As always we appreciate your suggestions!

aa I get it, good explanation!

raser1 This was 4 months back at this time, are there any new developments with/ for the powerblow?
I just ordered mine and it will arive on tuesday

I read something about needing the haptics connect app to set the ''max suction strenght'' does this mean I set it in the app and then it stays at that setting afterwards as I connect it with DeoVR, or is there some other wizardry needed?

Also just as a prep (can't really find it anywhere), is it just ''BT-connect & play'' as it was with the Keon through DeoVR? Or ar extra steps needed for connecting both Keon & Powerblow?

Thanks in advance for answering my noob questions

MvdB92 Congrats on your PowerBlow purchase!

For connecting your PowerBlow - follow the easy guide here (Option 2 - Direct in DeoVR or Mobile Haptics Connect app methods both work, and its 'BT-connect and play' just like the Keon)

https://forum.sexlikereal.com/d/805-interactive-haptics-sex-toy-scripts-help-guide-kiiroovorzehandylovenseosr

You can access toy specific settings directly in the app where you can adjust suction strength to your preference and it will stay at that strength until you change it otherwise