rerun119 the arms have gas spring so i can push down to get in position or push up to get out the way when finished with it, only adjusted a screw on the spring once to get the setting right for the spring. the second one i use for my bed its a common cheap arm they sell very similar kinds many places including amazon

see just now the new mounts that kirro made that realcucumer mentioned, which look like decent solutions. The old neck strap was just a bad idea imo

    RealcumberScripts Hey guys - Kiiroo actually came out last month or so with ready to purchase handsfree setups just like you guys created, specifically crafted for the Keon

    You can check them out here:

    Keon Table Clamp = https://www.kiiroo.com/products/keon-table-clamp

    Keon Multifunctional Pillow & Strap = https://www.kiiroo.com/products/keon-multifunctional-pillow-strap-by-kiiroo

    I have the pillow, it does not work all that well. It is too narrow and you need to hold it up between your thighs.

    It should have additional foam "wings" that fit under your legs and allow the user to move his legs around a bit and still be stable.

        i use a stanley vice grip, with an upside down small ikea 3 legged stool, with only 1 of the legs attached, then have the vice between the handy and the stool leg. you can use it seated in any chair or recliner, or seated or laying down in bed, It works perfectly and is a pretty cheap option.

        once handy release a hands free mount i can use it with this system, though im not sure i need it.

          dojimmy
          sorry my reason for mentioning my handsfree setup for the handy in a kiroo thread was that the same ikea stool seems like it would be ideal with the new kiroo handsfree mount. I forgot to type that part 😄

          Uk link for the stool is here, but im sure ikea sell them everywhere.
          https://www.ikea.com/gb/en/p/kyrre-stool-birch-60416925/

            5 months later

            soundjoe Hey how did you attach the keon to the vesa mount? i'm trying to do this as well, but i cant attach it, could you be more specific? thanks

                disket100 had to use the keon neck strap mount(which had to buy from kirroo) to clip into the keon, and run through the slits of the neck strap mount some long zip ties that i tied to vesa bracket, velco straps should probably also work. Tied on tight and secure so keon wouldnt move around when attached and in use. so i had the neck strap mount tied on tight to the vesa bracket and whenever wanted to remove or attach the keon from the stand could do it easily by clipping the keon back in and out of the neck strap mount

                    4 months later

                    UPDATE: I've found a Keon hands free solution that works better while reclining than all the others I've tried, and I've bought all the official accessories and made a couple of solutions myself.

                    Stack two of these cushions on top of each other and stick the Keon in the indent. Place the cushions on your thighs and your dick into the Keon and you're ready to go. There are less expensive versions of the cushions on Amazon and those may work too -- but these work perfectly and they are the ones I have. Also, sometimes having the weight of those cushions of your thighs almost feels like the girl is siting on you when in a cowgirl type position.

                    Try it and have fun!

                      RealcumberScripts

                      Click on the photo -- it links to the cushions on Amazon.

                      I can't seem to insert the link without the photo appearing.

                        3 months later

                        mebejoe Thanks! Great idea!
                        I have ordered the Keon base, but allready think I am going to cancel the order, as a second view it looks way to thin to stand up right!
                        I have just found a cheaper version for UK users on Amazon:

                        I will order and give it a try.