Hello all. I have been experimenting with determining the ideal seated-in-bed handsfree kiiroo keon setup and have found a setup that genuinely solved all of the issues that I had encountered previously:

  • vertical stability
  • horizontal stability
  • angle stability
  • depth stability (all others listed are self-explanatory, but this one was particularly difficult as the movement of the kiiroo keon downwards would typically lead to some upward displacement of the kiiroo keon which ends up preventing 100% depth, regardless of the amount of lube/friction in my experience)
  • comfort of setup/body posture
  • ease/adjustment mobility

Although each of those sound relatively straightforward, I am sure that anyone who has tried to "simply brace the kiiroo keon with a pillow" has realized it isnt as successful as it sounds, for many if not all of the reasons above.

IMAGE OF SETUP: https://gyazo.com/21e6299b1e30c41168bab0022d960182

I have linked examples of the items below just for convenience, even though they are easy to find as well.

Knee pillow (with substantial height and symmetric width on both ends): https://www.amazon.com/gp/product/B01A8TPWS2/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Velcro adhesive roll: https://www.amazon.com/gp/product/B00FQ937NM/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Fleshlight Turbo sleeve: this is just a side note, I highly highly recommend the Fleshlight Turbo sleeve within the kiiroo stroker case (it fits perfectly fine given the malleability of the fleshlight sleeve) https://www.fleshlight.com/products/turbo. It is the best sleeve that I have used with regards to actual pleasure (where a tighter anal sleeve/stamina sleeve just simply have come nowhere even close to it for me)

Velcro instructions: Adhere strips of hook loop superiorly on the front of the kiiroo keon (superior placement is so that it is high enough that it won't scratch your abdomen). This also allows the carpet-esque velco side to be the working side/easy on your hands. Keep the back adhesive protection on this working side to keep it from becoming sticky.

Use instructions: When you slide your legs under this setup, it allows you to pin the bottom half of the knee pillow under your thigh without any additional effort/bracing. The kiiroo keon then sits a little higher than it appears in the image I attached (due to your legs resting underneath). Then tighten the setup by adjusting the velcro around the top of the neck of the knee pillow. The setup becomes secured very very well in my experience, and the slight angle created (about 10-20degrees off of vertical) in this position has felt very natural.

Hopefully this is helpful for someone, figured I would share my solution because I personally had to play with a bunch of different approaches but really found immediate success with this. Lmk if anyone has any questions.

IMAGE OF SETUP: https://gyazo.com/21e6299b1e30c41168bab0022d960182

    bamjus changed the title to Genuinely successful seated-in-bed HANDSFREE kiiroo keon setup .

    I might have to try this. The one thing I hate about this device, is the size and shape. Especially when you got oil on your hands. I typically turn it to where I can grab the top part that sticks up. But this would be a lot better I think. haha

    bamjus Great detailed post @bamjus ! I may give that a try one day

    I may also suggest this to guys wanted a quick handsfree setup:

    • Just plop your Keon inside any inexpensive under $20 thick memory foam neck cushion, that looks similar to this:

    https://www.amazon.com/SAIREIDER-Airplane-Sleeping-Adjustable-Portable/dp/B07945TZVQ/ref=sr_1_34?keywords=neck%2Bpillow&qid=1637659823&sr=8-34&th=1

    Kiiroo sells Neck straps to hold up your device as well as an option

        RealcumberScripts This was my attempt prior to the knee pillow!! haha. I even got a pseudo-infinity type neck pillow with a buckle strap to really secure it down, however I still experienced depth and angle instability that i had mentioned above. IMO I think the anchor of the knee pillow physically being underneath your hamstrings in a seated position (rather than neck pillow resting on your lap) was the biggest contributing factor towards my decisively successful experience with the knee pilllow. But that is just my experience, more options the merrier!

          great ideas! was looking for something cheap to help while in bed. heres another option been using for seated position. its got the neck strap bracket inserted and tied that around the monitor stand, allows me to easily clip on and off the keon and works super well, but additional cost ofcourse w monitor stand and neck strap

            a year later

            soundjoe Hey soundjoe, I'm sixinchking and I was wondering if you could send me the link to the monitor stand I just bought my neck strap today (hopefully the monitor stand is on Amazon)
            Thanks
            Happy fapping !

                Sixinchking
                hey its ergotron lx sit stand, bought it here: https://www.newegg.com/p/0RC-000K-00034?Description=lx%20sit%20stand&cm_re=lx_sit%20stand-_-9SIA25V23B3974-_-Product

                its def one of the most expensive monitor stands u can buy and i bought it originally for other purposes and found it had this good use case as well. its good in that it has a very long arm and can go very low but know besides being expensive its also heavy so not something u wanna take on and off a desk often.

                I use for my bed a different common cheapo light stand that does the job also well. since it has a shorter arm tho i needed to clamp it onto an overbed table so can get it in a good position.
                (if ur bed is very low like on the floor btw this setup will likely not work for u)
                overbed tables u can buy an amazon as well. my overbed table and stand(H-100 North Bayou) i bought locally and dont se them on amazon but they have tons of very simliar items that should be just as good. for the stand u want something that will go low, so prefeably with a straight bottom arm, myb something like this would be good: https://www.amazon.com/HUANUO-Single-Monitor-Stand-Adjustable/dp/B08FB7WFCT/ref=sr_1_14?crid=KTXJIF4J8YV8&keywords=H-100+North+Bayou&qid=1669564935&sprefix=h-100+north+bayou%2Caps%2C208&sr=8-14

                i use some ergotron vesa mount that came with the other stand to connect to the keon mount with zip ties, but other vesa plate thingy probably work well or maybe just try tying it to the arms plate. sucks that keon didnt design it with vesa compatability so had to do this scuffed zip tie hack, but once all set up and done, get completely hands free best amazing experience possible with the keon, have fun 🙂

                    soundjoe I read this yesterday and tried to buy one at bestbuy and walmart today. They didn't have anything close to it. I guess i"m going to buy it on amazon. I'm assuming it moves around without having to turn some screws or knobs?

                        RealcumberScripts I just received the table clamp yesterday and I was worried it would be very flimsy and low build quality but it seems very strong and doesn't move at all when the toy is running.

                            thatthotok was also worried about this when seeing they released this clamp. it completely stabilizes the toy when running?? no residual motion/shaking when running at high speeds?

                                rerun119 the arms have gas spring so i can push down to get in position or push up to get out the way when finished with it, only adjusted a screw on the spring once to get the setting right for the spring. the second one i use for my bed its a common cheap arm they sell very similar kinds many places including amazon

                                see just now the new mounts that kirro made that realcucumer mentioned, which look like decent solutions. The old neck strap was just a bad idea imo

                                  RealcumberScripts Hey guys - Kiiroo actually came out last month or so with ready to purchase handsfree setups just like you guys created, specifically crafted for the Keon

                                  You can check them out here:

                                  Keon Table Clamp = https://www.kiiroo.com/products/keon-table-clamp

                                  Keon Multifunctional Pillow & Strap = https://www.kiiroo.com/products/keon-multifunctional-pillow-strap-by-kiiroo

                                  I have the pillow, it does not work all that well. It is too narrow and you need to hold it up between your thighs.

                                  It should have additional foam "wings" that fit under your legs and allow the user to move his legs around a bit and still be stable.

                                      i use a stanley vice grip, with an upside down small ikea 3 legged stool, with only 1 of the legs attached, then have the vice between the handy and the stool leg. you can use it seated in any chair or recliner, or seated or laying down in bed, It works perfectly and is a pretty cheap option.

                                      once handy release a hands free mount i can use it with this system, though im not sure i need it.