great ideas! was looking for something cheap to help while in bed. heres another option been using for seated position. its got the neck strap bracket inserted and tied that around the monitor stand, allows me to easily clip on and off the keon and works super well, but additional cost ofcourse w monitor stand and neck strap

    a year later

    soundjoe Hey soundjoe, I'm sixinchking and I was wondering if you could send me the link to the monitor stand I just bought my neck strap today (hopefully the monitor stand is on Amazon)
    Thanks
    Happy fapping !

        Sixinchking
        hey its ergotron lx sit stand, bought it here: https://www.newegg.com/p/0RC-000K-00034?Description=lx%20sit%20stand&cm_re=lx_sit%20stand-_-9SIA25V23B3974-_-Product

        its def one of the most expensive monitor stands u can buy and i bought it originally for other purposes and found it had this good use case as well. its good in that it has a very long arm and can go very low but know besides being expensive its also heavy so not something u wanna take on and off a desk often.

        I use for my bed a different common cheapo light stand that does the job also well. since it has a shorter arm tho i needed to clamp it onto an overbed table so can get it in a good position.
        (if ur bed is very low like on the floor btw this setup will likely not work for u)
        overbed tables u can buy an amazon as well. my overbed table and stand(H-100 North Bayou) i bought locally and dont se them on amazon but they have tons of very simliar items that should be just as good. for the stand u want something that will go low, so prefeably with a straight bottom arm, myb something like this would be good: https://www.amazon.com/HUANUO-Single-Monitor-Stand-Adjustable/dp/B08FB7WFCT/ref=sr_1_14?crid=KTXJIF4J8YV8&keywords=H-100+North+Bayou&qid=1669564935&sprefix=h-100+north+bayou%2Caps%2C208&sr=8-14

        i use some ergotron vesa mount that came with the other stand to connect to the keon mount with zip ties, but other vesa plate thingy probably work well or maybe just try tying it to the arms plate. sucks that keon didnt design it with vesa compatability so had to do this scuffed zip tie hack, but once all set up and done, get completely hands free best amazing experience possible with the keon, have fun 🙂

            soundjoe I read this yesterday and tried to buy one at bestbuy and walmart today. They didn't have anything close to it. I guess i"m going to buy it on amazon. I'm assuming it moves around without having to turn some screws or knobs?

                RealcumberScripts I just received the table clamp yesterday and I was worried it would be very flimsy and low build quality but it seems very strong and doesn't move at all when the toy is running.

                    thatthotok was also worried about this when seeing they released this clamp. it completely stabilizes the toy when running?? no residual motion/shaking when running at high speeds?

                        rerun119 the arms have gas spring so i can push down to get in position or push up to get out the way when finished with it, only adjusted a screw on the spring once to get the setting right for the spring. the second one i use for my bed its a common cheap arm they sell very similar kinds many places including amazon

                        see just now the new mounts that kirro made that realcucumer mentioned, which look like decent solutions. The old neck strap was just a bad idea imo

                          RealcumberScripts Hey guys - Kiiroo actually came out last month or so with ready to purchase handsfree setups just like you guys created, specifically crafted for the Keon

                          You can check them out here:

                          Keon Table Clamp = https://www.kiiroo.com/products/keon-table-clamp

                          Keon Multifunctional Pillow & Strap = https://www.kiiroo.com/products/keon-multifunctional-pillow-strap-by-kiiroo

                          I have the pillow, it does not work all that well. It is too narrow and you need to hold it up between your thighs.

                          It should have additional foam "wings" that fit under your legs and allow the user to move his legs around a bit and still be stable.

                              i use a stanley vice grip, with an upside down small ikea 3 legged stool, with only 1 of the legs attached, then have the vice between the handy and the stool leg. you can use it seated in any chair or recliner, or seated or laying down in bed, It works perfectly and is a pretty cheap option.

                              once handy release a hands free mount i can use it with this system, though im not sure i need it.

                                dojimmy
                                sorry my reason for mentioning my handsfree setup for the handy in a kiroo thread was that the same ikea stool seems like it would be ideal with the new kiroo handsfree mount. I forgot to type that part 😄

                                Uk link for the stool is here, but im sure ikea sell them everywhere.
                                https://www.ikea.com/gb/en/p/kyrre-stool-birch-60416925/

                                  5 months later

                                  soundjoe Hey how did you attach the keon to the vesa mount? i'm trying to do this as well, but i cant attach it, could you be more specific? thanks

                                      disket100 had to use the keon neck strap mount(which had to buy from kirroo) to clip into the keon, and run through the slits of the neck strap mount some long zip ties that i tied to vesa bracket, velco straps should probably also work. Tied on tight and secure so keon wouldnt move around when attached and in use. so i had the neck strap mount tied on tight to the vesa bracket and whenever wanted to remove or attach the keon from the stand could do it easily by clipping the keon back in and out of the neck strap mount