Interactive Haptics Sex Toy Scripts Help Guide (Kiiroo,Vorze,Handy,Lovense,OSR)

RealcumberScripts

Joe396 thanks @Joe396 !

yes, 'remote control' is same as 'remote API'

If you are using scriptplayer - go to settings -> Player -> you will see Deovr IP setting option there

bamjus

@RealcumberScripts Hello, I am trying to figure out how Option 1B works, specifically the 'SLR interactive' APK download/import into sidequest. The part described as 'Running the SLR interactive app prior and activating the bluetooth when prompted' is tripping me up. I am not sure where/how to execute those steps. That is where I am stuck. I do not have an android and was hoping to finally establish seamless connection between my kiiroo keon and quest 2. thank you so much. (I am using sidequest on mac if that is important)

RealcumberScripts

bamjus Hi @bamjus - I updated the instructions to be a bit more clear =

Were you able to sideinstall SLR Interactive apk onto your headset?

"5. Start the SLR Interactive app first!
(browse your apps in the main menu → on top to the right is a dropdown menu → select ‘unknown sources’) "

Same steps are posted here = https://forum.sexlikereal.com/d/1878-how-to-install-slr-interactive-directly-on-your-quest-2-without-phone

Hopefully that helps?

bamjus

RealcumberScripts Thank you so much for the quick reply. I have downloaded the APK file into sidequest and am trying to run it from the apps tab located at the top right of sidequest. When i hit launch on slr interactive on sidequest, it immediately black screens my oculus quest 2. i feel like im making progress, but still not sure what im missing. thank you again for helping with this/putting all of this together in the first place

bamjus

bamjus ohhhh, running slr interactive via the unknown sources tab ON the quest. ok sorry, my bad, let me see if i can figure out the rest and i'll let you know, thank you so much!!

bamjus

@RealcumberScripts ok made some progress, i was able to initiate the SLR interactive app on the oculus quest, and log in with my SLR credentials successfully. I am stuck now, the kiiroo keon is not syncing via bluetooth to the SLR interactive page. I disconnected the kiiroo keon from any other bluetooth connections and it is blinking blue (ready to pair) instead of solid blue. How do you suggest I try to establish the bluetooth pairing?

RealcumberScripts

bamjus good to hear 🙂 - you are close!

You are pressing the 'Scan' button in slr interactive app while keon is blinking blue?

Make sure quest 2 and Keon are very close to eachother (no obstruction)

You are positive SLR Interactive has all permissions on allowed by Quest 2 and Bluetooth is enabled?

If unsure, just uninstall SLR Interactive, reinstall again to make sure

Doesnt hurt to then reboot your devices (Keon and Quest 2) just in case as well

If still unlucky - search for Keon on your phone bluetooth (but do not pair) to ensure its actually working in pairing mode

bamjus

RealcumberScripts I reinstalled SLR interactive and saw the permission allowance pop up again, clicked allow, and keon was able to pair! And it works when i go start a video. Thank you so much. I would have never been able to come close to figuring all of this out. Really appreciate all the work you do

RealcumberScripts

bamjus Great news! Hopefully this helps out others who may have same issues as well - Thanks for the support and hope you enjoy! 🙂

Geraldjl

Just got my Handy and this chat has great information. Due to poor network connectivity, I am trying to download and play both the video and script direct from the Quest 2. The video works but the script will not work ie the Handy does not seem to find the file. I have tried placing both files in the Video as well as the Interactive folder on the Quest 2 but it does not seem to work. Am I missing something?

Jericho13

hey there 🙂
i tried to set up my new lovense max 2 for several days now, trying everything written above
i got: lovense max 2, a PC, an iPhone (iOS), lovense usb adapter, interactive subscription and a quest 1
the only way i can use the max 2 properly is when i download clip and script and play it with DEO VR
if i try to stream via DEO VR the vibrations dont really match any of the movement in the video

here is what i do for setting it up the only way it worked untill now:
via air link i connect my quest 1 to my PC. Then i open intiface and connect my toy. then i open scriptplayer and buttplug intiface and toy. open up local files + scripts for streaming downloaded clips and scripts
if i try to stream SLR interactive clips nothing matches really with my device and i cant figure out what the issue is
if i stream without interactive toys i never ever have problems with my internet connection so i think this cant really be the issue.
EDIT: also i cant connect the toy in any way directly to my quest 1 for streaming directly without going via PC :/
does anyone have some ideas what is going on wrong here? 🙂 would be hard to hear that i only could buy each wanted script and also keep paying my subscriptions 😛

thanks in advance!

RealcumberScripts

Jericho13 Hey @Jericho13 - I dont think streaming works on pc + initface/scriptplayer. Scriptplayer is likely just loading a default or previously used script hence why its not matching to the video on screen (you can tell by looking at scriptplayer as it should say what script is actually loaded)

I would recommend waiting for iOS support in next few weeks for lovense on slr interactive or try using an android device, even a firestick device like @thatthotok mentions above

thatthotok

Hello everyone, just wanted to let everyone know of a workaround you can use if you happen to be an iOS user and don't have an android phone like me. I used my Fire Stick to stream the scripts. I did this by downloading the SLR Interactive apk from this link above and putting that link into a downloader app on my fire stick. You can get the downloader app from the regualr Fire Stick app store. Make sure you have ADB debugging turned on in the developer settings, and "Install Unknown Apps" turned on for your downloader app too. The only problem is once you get the SLR interactive app installed, and allow the location and bluetooth to be used, the interface is obviously not designed for a fire stick so you cannot navigate the app to sign in to your SLR account. So what I had to do was install another app to allow me to have a mouse cursor. This is the one I used. Same thing put the link into the downloader app. From there I opened the SLR interactive app, double tapped the play/pause button to turn on the mouse cursor, and I was able to sign in and use the app to connect my keon and it worked flawlessly. Id be happy to help anyone who would like to try this out.

Jericho13

RealcumberScripts
thanks for this productive reply!
and about thatthotoks solution - very interesting how ppl manage stuff somehow, genious ;D
thank you guys 🙂

Jericho13

hey guys its me again -since recently i got the problem that if i download a scripted szene from SLR with the script included, i get something like a "vp 9 codec needed" error on my quest 1. for example i had to download the same szene 3 times yesterday to get one working for interactive use.
today i had to do it twice aswell for another one

has anyone an idea what i am doing wrong?
thanks in advance!

montyslick

RealcumberScripts Sorry if I missed it but I don't see how to pair my Keon to the SLR app running in Windows.
The SLR Interactive icon in the playlist is red. The Keon is in pairing mode. Scripts are added to my account. Videos play but there's no action even after restarting everything.
What am I missing?!

jakethegoblin

hello. I have an Oculus Quest 2 & Kiiroo Onyx+ with an iPhone. I reached out to customer support before buying the scripts sub to ensure I would be able to safely utilize the scripts function without having to do any sideloading or anything else risky with my headset. I cannot get the onyx to connect to deovr. the steps say that I need to connect the headset to the onyx first but the haptics connect app cannot connect to the onyx while it already linked to something else via bluetooth so I do not know what to do. I have sent two emails to the helpdesk over the course of the last week & I have received no replies. feeling kinda helpless.

RealcumberScripts

jakethegoblin - Dont connect your Onyx+ to anything else but your Quest 2 (remove and unpair it from everywhere, and any other devices connected through bluetooth to be safe first - then repeat all the steps in the guide)

jakethegoblin

RealcumberScripts thank you for the quick reply!

just to be sure I understand: I should not have the onyx+ connected to the haptics connect app on my iPhone at all?

jakethegoblin

RealcumberScripts I've followed the steps with the onyx+ connected to just the Quest 2, didn't work. I tried that again, while also connecting the Quest 2 to my iPhone with the haptics app open which also didn't work. the best I got was the light next to the interactive toy icon on the bottom left to flash green momentarily before shifting yellow to orange to red.

RealcumberScripts

"just to be sure I understand: I should not have the onyx+ connected to the haptics connect app on my iPhone at all?"

If you are only using Option 2 (not option 3) then yes, do not have your Onyx+ paired anywhere outside of the Haptics Connect app, and compeltely forget/unpair it if you did

Then follow the steps again for Option 2

You are likely experiencing a bug with Haptics connect app though, hopefully devs will push an update this coming week to resolve many possible issues like yours

« Previous Page Next Page »