Kiiroo Keon Connection issues. - New Firmware.
It seems haptics can now see the Keon R2 as I get what I think is an indication of pairing...in the device list in haptics it has a green dot by kiroo keon and on the manual screen in haptics the play button causes the keon to start moving. But, on the player screen in haptics I have the error message "Player is not found on the connected network." Below that shows the connection where I am logged in with a disconnect button. If I disconnect I lose the player screen, but the keon still shows as green on the devices screen. So, then if I go back to SLR and CONNECT SLR TO HC APP I get the player screen back in haptics with the same player not found error message and the green dot is gone from the keon on the device screen but the keon is sitting there still solid blue thinking it is still paired. So back to the player screen, push the X button up top and now the keon starts searching again.
Might be too detailed, but I really would like to get this fixed. I have never got my Keon R2 to work yet, and had it for awhile. Seems I can get haptics to pair up with the keon, and I can get haptics to authenticate to SLR, but within haptics there is no connection. Can you help please?
Additional info, perhaps too detailed, apologies if it is. When it haptics has the green dot on Kiiroo Keon the words Kiiroo Keon are lit up, the gear symbol to the right of the name is lit up also, but in a smaller font below the words Kiiroo Keon there is the word Connected....this one is not lit up.
JDibe So to be clear - you are on the same wifi network on all your devices, but you get the 'Player is not found on the connected network' prompt?
Just checking you followed this in option 2 right?
(https://forum.sexlikereal.com/d/805-interactive-sex-toy-scripts-complete-help-guide-kiiroovorzehandylovense)
"Now open your mobile phone device's website browser (use the SAME device you have Haptics Connect app installed on) and visit www.sexlikereal.com (Google CHROME browser is recommended!)
(If you installed Haptics Connect directly onto Quest 2, then perform these steps in Oculus web browser instead)
Then Log in with your SLR Premium account info
Click your SLR profile button (top right hand corner) - There you will find the deeplink button that you will need to click on to 'Connect SLR to Haptics Connect App' in your Profile section
You will then be auto transferred to the Haptics Connect App where you should now see the Player tab showing you logged in!"
In terms of wifi network, my PC and my phone are both on the same network. Yes, I did the same thing as listed in option 2. In my haptics right now, I have the Player tab available which indicates I am authenticated with SLR because I accessed SLR on my phone to get to the deep link button, my phone is where haptics is installed as well. As for the Keon, It does not permanently pair with haptics...when I close haptics the pairing with the Keon disappears and I have to rescan it; when I do it immediately acquires the Keon and I get the green dot.
Out of curiosity (because I have PC based Vive Pro 2 headset) I disconnected the authentication just to see if I could do the same thing from my PC, but the deep link button doesn't appear on the PC.
Oh, for clarity, I never tried to install haptics on pc, don't even know if that's possible.
Second item of clarity. I have the ability to link my android phone to my PC, to my knowledge this cannot be done if the phone and the pc are not on the same wifi network. So, offered as validation that I am in fact on the same network.
JDibe Deeplink button will only work on same device haptics connect is installed on
Sorry. its getting a bit confusing now - just to be clear - what is the main problem still outstanding on your end?
- What do you mean by 'it does not permanently pair with haptics connect?
- Does the Keon actually connect and can you play scripts on slr in interactive category?
- Does the Keon connection remain or does it end up just disconnecting on its own?
- Edited
Did some more experimenting, think I have defined the problem. I have always tried to use it from local drive, have the vid file and the script file both saved in the same folder and did not alter either of the names. All this time, that's what I have been trying to do. Today, for the hell of it, I decided to try and run it directly from the site, and that works! When the Keon started running, I checked and the error message was gone. So my problem is that I cannot get it to work running it from saved local files.
In case you ask, I am accessing my local files through my headset on the SLR app. When I am looking at my local files, I have gone into settings and the interactive switch for haptics is on. I can run the VR file, but there is no interactive function.
JDibe Thanks for the update - if streaming is working, then its working as intended, so thats good
For local folder playback, youre filenames likely arent 100% matching, or in the same folder - make sure those are matching 100% and simplified with alphanumeric characters only and it should work
So, everything is same folder and 100% matching, I guess modifying the file names to alphanumeric only I can try, but I have a concern. Doesn't part of the filename sometimes contain info used by the headset for rendering parameters? Like 200 fisheye is the only example I can think of since I am new at all this, but doesn't that require the "_MKX200" to stay in the filename for proper playback? That underscore isn't an alphanumeric character right? Also, I don't know where there is a list of all the things within file names that must stay in the name.
JDibe - That underscore is ok to keep, avoid using anything else that is not abc or 123
Tried and maybe I just don't get it. So, would you mind doing to these two names, with minimal changes, modification of the file names that would make this work?
Vid name:
SLR_SLR Originals_Make Plays, Not Grades_2900p_22137_MKX200
Script name:
SLR_SLR_Originals_Make_Plays_Not_Grades_2900p_22137_MKX200_Final_Realcumber.funscript
I tried a few things. Tried making them as simple as Test. Tried making them precisely identical all the way to the end of MKX200. Tried that same precisely identical thing, with .funscript added on script name.
- Edited
JDibe - looks like you did not change the video filename?
You need to have the video filename exactly match the script name, and placed in the same folder, just like this:
video .mp4 file = SLR_SLR_Originals_Make_Plays_Not_Grades_2900p_22137_MKX200_Final_Realcumber
script .funscript = SLR_SLR_Originals_Make_Plays_Not_Grades_2900p_22137_MKX200_Final_Realcumber
- Edited
Of course that worked. I was trying to correct one to match the other manually, simply prone to mistakes. So, I had an oh-duh moment, copied one then went into the other and pasted it. Problem solved....jeez.
Anyway, Realcumber thanks for working with me. Me and my Keon are having great fun together now!
RealcumberScripts This was all very helpful. I have only ever downloaded one script because I was confused on how to make it all work from a local file.