Vrsumo2017 Hey!

  • Luminance heh, we will put it back, it shouldn't be renamed
  • I will find a solution for +- probably it wont make it to official 13.10 release, we are also working on better slider manipulation, but its not close to release
  • How it works shouldn't change at all, the code is the same
  • For the range and falloff, we only removed useless values:
    • Setting range over 750 rendered all pixels invisible, so we made it stop at that value
    • Same for falloff anything between 0 and 900 was pretty much useless, so now you see 900-1000 range, but we offset it to 0-100
  • We didn't touch horizontal offset, if you could elaborate what is different? We did change the position, its now seconds last, not last

      Sandi_SLR We didn't touch horizontal offset, if you could elaborate what is different? We did change the position, its now seconds last, not last

      Well something changed about it 🤔
      Before if I moved the slider the image would move kinda fast in size causing my eyes to hurt, so I would just use the - + to move one or two notches and that worked well.

      Now with 13.10 if i use and move the slider its easier to look at the image as it changes in size and not causing eye discomfort.

      That's how I can explain it. 🤷‍♂️

      Edit:
      Also on previous version having the horizontal off set full max left or right it looked blurry

      Not having that issue with this 13.10 version

          Sandi_SLR better slider manipulation

          If your talking about how when you move the slider to a # you want, example say I move the slider to # 50 but once I let go the trigger it'll sometimes move to like 60, on this 13.10 the slider does move a Lil better but still jumps around after trigger release but not as much as previous.

          I would have that problem on the fall off, I'd pull the slider to where I like it on my image but once I release the trigger it'll jump to different #, at that point I'd use the - + to adjust it to my liking.

          • - & + help 👍

            Vrsumo2017 Also on previous version having the horizontal off set full max left or right it looked blurry

            OK this might get confusing now, but I checked 13.09 and the horizontal off set works like 13.10

            I have 13.06 and checked it and that one and previous versions before did hurt my eyes and was blurry when moving sliders and blurry all the way max to the left or right.

            I guess I never notice the change on 13.09 cuz I always use the + - and never used the slider.

            This mysterious change to the horizontal off set must of happen before 13.10.

            But huh, horizontal off set works good tho
            👍 😳🤦‍♂️

            End of the horizontal off set topic 🤐 lol

                Been using 13.10 pt options, so far works good, never mind my comment about the resest arrow, hardly noticed them, but I do miss the + - on the first three sliders. But over all its working pretty good, the deo vr app in general working pretty good, i haven't come across any major bugs yet.

                Hey there's no Pico 4 beta? I been using the quest 2.

                Vrsumo2017 This mysterious change to the horizontal off set must of happen before 13.10.

                Figure it out, previous versions before 13.09 if you move the horizontal both images move.

                I noticed on .09 and .10 if you move the horizontal only the right image moves, causing it to move smoothly and less double vision and less eye discomfort.

                I figured it out by closing my eyes one at a time and notice the left image stays in place when moving the horizontal on version .09 and .10 🤷‍♂️

                But It's works good 👍

                  Imo, I think the falloff at 1000 worked better, cuz it took out a little bit with each - click, this version .10 at 100 one click of the - can take out to much around the edges.

                  I was wondering if "falloff" should be renamed to "edge up" or "edging" or "smooth out" cuz that's what we doing with it is smoothing out the edges. Idk...just a suggestion

                  Falloff, lol
                  I'm start using that when people get on my nerves. Fall off bro. Fall off 😏

                    Vrsumo2017 Hey, when you are setting new falloff values, it is same as you setting range from 900 to 1000 in old version. We just removed the 0 to 900 part.

                        SchnuppiLilac lol, yeah falloff never really fit the task it's ment to do. Imo

                        I mean you can fall off a cliff, fall off the bed or fall off the edge, 🤔🤣 maybe that's what they ment.

                        But I was thinking of it like a hair cut, edge me up or blend in my edges more, lol idk 🤷‍♂️ 🤦‍♂️😆

                          Sandi_SLR see trough?

                          I call it ghosting, but I like to make it see through sometimes, during a laying cg you kinda blend your own body in with male model, and you can see how the model lookes positioned on your lap, it's awesome. But I go back in forth, I'll ghost it and then go back to solid. Just depends.

                          Plus when ghosting it kinda give it that hologram-ish look you would see in movies.

                          Really think it should stay at 1000 the way it is with 13.09 👍

                              Sandi_SLR posting presets wise, that 725 probably the lowest I ever posted but for my personal use I can go lower, it just depends on the video image.

                                Sandi_SLR Saw some settings in the PT thread from another guy, going as low as 680 or so. He used it on the therapy alpha scene, for which most people probably don't see the need to fiddle with the settings but I think he did it to get rid of the furniture in that scene and/or make the male talent more transparent to be able to blend is own body in.

                                    Sandi_SLR it is same as you setting range from 900 to 1000

                                    The action is the same but for edging up if i click on - it edges up to much, at 1000 is more of a gentle edge with one click on the -

                                    Lol, trust me I use the pt option ALOT 🤣

                                    1000, is better

                                      SchnuppiLilac He used it on the therapy alpha scene,

                                      Yeah, the 1000 offset works good for that too.

                                      Sum might be fine with the 100 and sum might like the 1000 but the 1000 benefits both. Imo

                                      Plus if needed when Im edging up for solid pass throughs with the 100 hitting one click on the - takes out tomuch,, with 1000 hitting one click on - takes out less and its better cuz you can keeping hitting the - and get the edge where you want it. It's like erasing small amounts before erasing tomuch.

                                      If any of this makes sense. 🤦‍♂️