Autoblow AI ultra no longer working within DeoVR, says device not supported

doublevr

Reeses AlexSLR let's investigate the issue

AlexSLR

Reeses Let's summarize the details to make sure nothing is missing:

You have Quest 3 and SR6 sex toy. The DeoVR version is 15.1.
Streaming scripts don't work, but is there an error message?
Local scripts work well.

Reeses

AlexSLR not entirely.
I've never been able to get my sr6 to run via deovr on my quest and deovr on windows. DeoVR on windows always, always, always opens a frozen DeoVR page. It might as well be a screenshot of deovr opened to deovr.com. I Got Deovr windows from steam vr since it doesn't seem to be available for windows from slr . com

So pre-V15.1 deovr, I could run my SR6 fairly painlessly via MFP, streaming and downloaded content with .funscript files in the headset.

Post V15, I get no error message on Deovr, or in MFP, just no streamed script, using DeoVR as the video player.

MFP still runs local content with .funscript files just fine.

Reading on other forums, it seems at though the VAST majority of people cannot get their tempest toys to work via DeoVR software, and resort to MFP.

If it were as easy as running my keon was, man I would be all over it. With the keon I would just turn the headset and the toy on, and hit "play", bam in business. Problem with the keon is they seem to last 4mo to a year, then either the motor locks up or it flashes error messaged.

Now that I have an SR6 idk that I could go back to a single axis toy.

maximus8100

I have a Meta 3 with the Autoblow ai Ultra running DeoVR 15.1 and the only message I see is under the options where you can see if a video has a script it says Device not supported.

Reeses

doublevr I have tried to follow the directions to run my SR6, open DeoVR on my quest, slr.com, logged in, try to open deovr on my laptop with the SR6 plugged in. The deovr windows app via steam always opens a frozen window. Can't click on anything, can't change the web address etc. The only way I've gotten my sr6 to work is MFP.

I would love to have an easier way to run my SR6 via deovr/slr software, before my keon broke (3rd one) it was great, no fuss no muss, just hit "play".

AlexSLR

Reeses Can you please specify if you updated the firmware for the SR6?

Reeses

doublevr you guys have multi axis scripts? When I click on the Nitche for multi axis in categories I believe it pulls up two older videos, do I need to use a different filter?

maximus8100

I tested my device today and it was working. Scripts are now loading onto the device, it is alot slower for the script to download to the device.

Reeses

AlexSLR I can't get that far in the steps listed on the slr website Alex. How am I to update the software if deovr for windows won't open?

Sorry for the tone, but I'm agitated that slr firewalled us out of the scripts that we pay for before making an easy way to connect supported toys.

Download a app from a third party thay doesn't work (deo windows via steam), have to airlink/cable link quest to pc (which also doesn't seem to work, tried for 2hrs last night), and now the easiest way to do it being MFP is firewalled out?

If MFP can do it to where a tech dummy like me can figure it out, then why can't SLR?

Haptics connect was easy enought on the cellphone. Why can't this be that easy, haptics on the laptop, usb to the sr6, turn on headset?

AlexSLR

Reeses I can't get that far in the steps listed on the slr website Alex. How am I to update the software if deovr for windows won't open?

Please note that you need to update the SR6's firmware, not the DeoVR app.

Adane86

maximus8100 This started 3 days ago, my device shows connected but the script never gets downloaded to my device and when I look in the options where is shows if the video has a script it now says my device is not supported. Did they remove support for the Autoblow? My device works on the main autoblow website and is able to get scripts. I am running a Meta 3 with the latest version of DeoVR. I also checked my subscription and its good until Nov of this year.

That definitely sounds like a recent change rather than something on your end, especially since your Autoblow still works fine on their main website. A few things you might want to try/check:

Re-login inside DeoVR – sometimes device permissions reset after an update. Logging out and back in can refresh support.

Clear cache/temp files again – just to rule out any leftover data conflicts.

Check DeoVR + SLR update notes – it’s possible they pushed an update in the last few days that affected third-party device support.

Test on another headset/device if possible – just to confirm it’s specific to the Meta 3 + DeoVR combo.

Contact SLR support directly – if the options menu now shows “device not supported,” that usually points to a server-side change. If support for Autoblow was removed or limited, they should be able to confirm it.

Given it worked fine until 3 days ago, and still works on Autoblow’s own site, this looks more like a compatibility/support issue on the SLR/DeoVR side rather than a problem with your device or subscription.

Reeses

AlexSLR
So SLR sucks. If you have a quest 3, and an SR6, you can't use it on Deovr anymore unless you have a fn super computer.
I have a intel nuc 15 gaming laptop, meta quest link says "your systems graphics card is incompatible."
Apparently I can't run my SR6 unless I'm linked via meta quest link.
So I'm stonewalled at step one, connect quest to laptop.
But that is just like SLR, break everything, provide no solution, expect everyone to keep paying for videos AND scripts that they can't use.

Why the hell don't you just do what MFP did for tempast users? Using a keon is stupid after using a sr6. It's like going back to a cardboard headset.

SLR, if there isn't a solution by my next billing cycle I'm canceling.

AlexSLR

Reeses Can you please specify if you updated the toy's firmware as requested?

Reeses

AlexSLR bro, Quest 3 won't link up to PC, DeoVR for windows via steam won't open a non-frozen page, why would I update the firmware? I get the feeling that if none of SLRs other solutions work, then the update would brick my toy from even working on MFP with local scripts.

We are stalled out at "link quest to PC via meta quest link" and we are also stalled out at "open DeoVr on windows.

It seems like SLR needs to come up with another software solution that doesn't require PCVR link for all us guys without super gaming computers.

Like haptics connect for windows, with T-Code via USB.

Seriously, how many quest users are going to have the latest and greatest laptop/desktop to run PC vr? The whole point of a quest is to NOT own a $5k computer to run VR.

When you limit SR6 scripts to those with the machine capable of running a quest via link, you cut out 80-90% of quest users

doefi3

Reeses
"Like haptics connect for windows, with T-Code via USB."

we used to have this program that did just that called "joyfunplayer" created by an SLR programmer and linked up with SLR easily with no special firmware or powerful pc required. When that lost support only than i started using MFP. Now MFP is gone, perhaps they should bring joyfunplayer back

AlexSLR

Reeses Is it correct that you don't use a standalone DeoVR version installed from the Meta Store?

Reeses

doefi3 no doubt man, or something like it. I can understand why they would want the scripts to be secure, that makes sense.

But to leave us without an option short of having a super powerful gaming VR PC? Thats rather bogus.

Reeses

AlexSLR on which device? I have DeoVr on my quest 3 via meta store.

I've seen no such option for windows deovr other than steamvr, which as I've said apparently you need a super computer to run steam/meta pc vr.

Reeses

AlexSLR this is your set of instructions, no?

"Direct connect your OSR2/SR6 toy

1 - Launch the DeoVR app. Go to www.sexlikereal.com into the browser and log in.
2 - Click the settings cog icon -> Go to the 'Haptics' Tab -> Toggle the 'TCode (OSR)' option ON
4 - Connect your OSR Toy via USB to your PC
5 - Thats it! Now Play any sex toy supported video and enjoy next level immersion!

NOTE: Currently OSR2/SR6 support only works with Windows PCs (Wi-fi support is coming soon!)
Also ensure you are on latest OSR official firmware versions."

So lets make this make sense.

Step 1, "launch the DeoVr app". On what? My quest or my computer?

Step 2, "go to settings, haptics, t code....." once again, on my quest or on my computer?

Step 3, there is no Step 3? OK skips to step 4...

Step 4, "connect osr to computer via usb" ok self explanatory...

Step 5, "that's it!" Wait, what? Connecting my osr to my pc via usb with "no other programs open" ok so what is my osr connecting to? What makes my quest talk to my PC and my PC to the sr6?

If its that simple then why is reddit and eroscript forums full of people saying "fk it use MFP"?

AlexSLR

Reeses Sorry for misuderstandng 🙏
The developers are working on fixing the direct connection.

« Previous Page